8B-16 RESTRAINTS
MAINTENANCE AND REPAIR
YAD8B110
YAD8B120
YAD8B130
ON-VEHICLE SERVICE
AIRBAG MODULE (DRIVER)
Removal and Installation Procedure
1. Disconnect the negative battery cable.
2. Place the steering wheel at the straight driving
direction.
3. Remove the screw of the airbag module.
4. Disconnect the airbag module connector, the horn
connector and then remove the airbag module.
5. Verify to tighten all of the module and each
connector.
Installation should follow the removal procedure
in the reverse order.
SSANGYONG Y200