SSANGYONG Y200 Manual page 1120

Hide thumbs Also See for Y200:

Table of Contents

Power Flow - Manual 1

In Manual 1, transmission drive is via the input shaft

to the forward clutch cylinder. The elements of the

trans-mission function as follows;

The C2 clutch is engaged to drive the forward sun

gear, via the 3-4 OWC.

The B2 band is engaged to hold the planetary gear

carrier stationary.

The forward sun gear drives the short pinion anti-

The short pinion drives the long pinion clockwise.

The long pinion rotating about its axis drives the

inter-nal ring gear and the output shaft in a clockwise

or forward direction.

The C4 clutch provides engine braking through the

3-4 OWC on overrun.

SSANGYONG Y200

AUTOMATIC TRANSMISSION 5A-25

To maintain this arrangement in the steady state sole-

noids and valves are activated as follows;

Solenoids S1 and S2 are switched ON.

The 1-2, 2-3, and 3-4 shift valves are held in their

first gear positions by line 500 pressure.

Drive (line pressure) oil from the manual valve en-

gages the C2 clutch.

Lo-1st (line pressure) oil is routed through the 1-2

shift valve to the C4 clutch, and to the inner apply

area of the rear servo piston for B2 band application.

ELEMENTS ENGAGED

Chapters

Table of Contents