SSANGYONG Y200 Manual page 1338

SSANGYONG Y200
MANUAL TRANSMISSION 5B-25
7. Remove the offset lever from the extension
housing with the detent ball and spring.
8. Remove the roll pin from either the offset lever or
extension housing.
YAD5B510
9. Remove the counter shaft thrust race and bearing.
YAD5B520
10. Carefully remove the oiling funnel from the end of
the counter shaft.
YAD5B530
11. Using a 10 mm wrench, remove the 10 bolts from
the shift cover.
Notice: For assembly, note the location of the two
bolts.
12. Lift up the shift cover after sliding it toward the
drain plug about 3 cm. At this time remove sealer
bond.
YAD5B540