5D1-12 PART TIME - T/C
Defective Code Reading
1. Position the ignition switch to OFF
2. Using a service connector, connect the No.2 pin
(lgnition) and No.13 pin (TCCU) of the diagnosis
socket in the engine room.
3. Position the ignition switch to ON.
4. Read the flashing 4WD CHECK indicator light and
identify the malfunctioning part(See Diagnosis
Table).
YAD5D120
How to Clear the Fault Code
1. Position the ignition switch to OFF.
2. Using a service connector, connect the No.2 pin
(GND) and No.13 pin (TCCU) of the diagnosis
socket in the engine room.
3. Position the ignition switch to ON over 5 seconds.
4. Do defective code reading and make sure that all
defective codes are eliminated.
YAD5D130
SSANGYONG Y200