Table of Contents
Advertisement
DI02-22
1
2
3
7
8
9
1
2
3
7
8
9
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Y220_02072
Y220_02073
4
5
6
10
11
12
Y220_02074
Intake
4
5
6
10
11
12
Exhaust
Y220_02075
Installation
1. Install the HLA device and finger follower. Check the HLA
device with the diagnosis procedures before installation.
Notice
• Put the cylinder head on the locating pins.
2. Place the bearing cap with the OT marks on both
camshafts facing upward.
Notice
• Apply the sealant on the cap (#12) for the vacuum
pump when installing.
• Apply the oil on the bearing journals before
installation.
3. Tighten the camshaft bearing cap bolts.
• Intake: #2, #4, #5
• Exhaust: #8, #10, #11
• Intake: #1, #3, #6
• Exhaust: #7, #9, #12
Tightening torque
Notice
Check the finger follower positions and align if
needed.
25 Nm
ENGINE HOUSING
DI ENG SM - 2004.4
Advertisement
Chapters
Table of Contents
