Function Of Operation And The Characteristic - SSANGYONG Y200 Manual

9D-76 BODY ELECTRICAL
FUNCTION OF OPERATION AND
THE CHARACTERISTIC
Intermittent Wiper of Velocity Induction Type
1. Intermittent wiper of velocity induction type which
is linked according to velocity of vehicle,
intermittent time is changed automatically a kind
of wiper system, this one is controlled by below
switch of control.
- Auto switch : which is selected to the intermittent
mode.
- Time control switch of the intermittent : this one
YAD9D2G0
control the intermittent time
- Intermittent time is set (at 0 km/h ) : 2.6 ± 0.5
sec ~ 18 sec ± 2 sec
2. After IGN 2 switch is " ON" , turn auto switch on,
or after turn auto switch is " ON" , turn IGN2 on,
immediately, velocity linking mode is operating.
Washer linking wiper
1. As ignition switch is turning on, if washer switch
is "ON", after 0.6 second, wiper is operating, after
washer switch is "OFF", wiper is operating 3 times
and then wiper is turned "OFF"
YAD9D2H0
2. While the intermittent wiper is operating, washer
switch is turned on more than 0.6 seconds and
then washer linked wiper is operating, if washer
switch is turned between 0.2 and 0.6, such as
MIST wiper, wiper is operating only once
YAD9D2J0
SSANGYONG Y200