SSANGYONG Y200 Manual page 1840

9D-84 BODY ELECTRICAL
SELF DIAGNOSIS
Summary
After using the service connector which is installed on
the instrument panel of lower driver seat, each failure
is diagnosed internal unit of stics, can be checked the
state of normal or mode of failure.
YAD9D3E0
Method to Diagnose
1. While failure is checking, use buzzer
2. While the switch of diagnosis is turned "ON",
(stics of diagnosis socket box : number 7 and
ground 1 is connected), the following operation
should not proceed.
•
warning : the first step of light is " ON"(buzzer
is not operating, lock or unlock of door is not
operating)
•
warning of seat belt(chime bell is not operating )
•
warning of key reminder (chime bell is not
operating, lock or unlock of door is not operating)
•
central door lock(lock or unlock of door is not
operating)
3. While switch of diagnosis is "OFF", function of
number 2 should get back to original position
4. While switch of diagnosis is "ON," data which is
diagnosed should output only once
5. If switch is operated by operation of other switch,
among them, first input data will be output(buzzer
is "ON"), and output is "OFF" for one seconds,
and remaining input data is proceeding output.
6. Output of buzzer is as following
T1 : 0.3 ± ¾0.1 seconds
T2: 0.3 ± ¾0.1 seconds
T: 0.6 ± ¾0.2 seconds
Notice:
•
If system is diagnosed, switch of diagnosis
should be always "ON"
•
While the diagnosis of system is operated, if
system is normal, buzzer is coming out, if
system is out of order, buzzer is not coming
out.
YAD9D3F0
SSANGYONG Y200