6. Position the #1 piston at TDC and install the crankshaft.
7. Install the piston connecting rod journal to the crankshaft
journal and tighten the bolts.
8. Measure the crankshaft bearing axial clearance.
• When new: 0.100 ~ 0.245 mm
• When used: 0.300 mm
9. Rotate the crankshaft by hand and check whether it
rotates smoothly.
ENGINE HOUSING
DI ENG SM - 2004.4
DI02-41
Y220_02110
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN