5B-38 MANUAL TRANSMISSION
5. Install the following parts :
•
2nd speed blocking ring assembly.
•
Thrust washer for the blocking ring inner cone.
•
Spiral retaining ring (Use special tools).
•
2nd speed gear spacer, bearing and gear.
•
2nd gear thrust washer and snap ring.
•
3rd speed gear spacer, bearing and gear.
•
3rd speed blocking ring.
YAD5B0A0
6. Using a hydraulic press and installer, install the
3-4 synchronizer hub onto the main shaft.
Notice: Align the blocking ring with the
synchronizer keys while installing the hub.
YAD5B0B0
INPUT SHAFT
Disassembly Procedure
1. Remove the following parts from the input shaft :
•
Main shaft thrust race and bearing.
•
Main shaft pilot bearing rollers (15 rollers).
YAD5B0C0
2. Using a hydraulic press and puller plate, remove
the input shaft bearing assembly from the shaft.
YAD5B0D0
SSANGYONG Y200