SSANGYONG Y200
COMPRESSOR
Removal & Installation Procedure
1. Discharge and recover the refrigerant from the
system.
2. Remove the fan belt.
3. Disconnect suction/discharge hose from the
compressor.
•
Remove the flange bolt retaining the hoses.
•
Disconnect the hoses.
•
Remove two sealing washer.
YAD7B460
4. Lift the vehicle and support safely.
5. Remove the skid plate.
6. Remove the compressor.
•
Disconnect the connector of the compressor.
•
Remove three front bracket bolts retaining
compressor.
Notice: Discard the used sealing washer.
YAD7B470
7. Installation should follow the removal procedure
in the reverse order.
Tighten the bolts with the specified torque.
1
2
Evacuate and recharge the A/C system.
A/C HIGH/LOW PRESSURE LINE
Removal Procedure
1. Discharge and recover the refrigerant from the
system.
YAD7B480
GENERAL HVAC SYSTEM 7B-23