SSANGYONG Y200 Manual page 1443

Position Sensor Interpretation
When the module powers up, it will read the position
sensor and the 4H/4L switch input and respond to the
possible codes as follows.
4H/4L Switch Input
4H
4H
4H
4H
4H
4H
4H
4H
4H
4L
4L
4L
4L
4L
4L
4L
4L
4L
SSANGYONG Y200
Motor Position
Left Stop No action required. 4L bulb off.
Left of High No action required. 4L bulb off.
High No action required. 4L bulb off.
Right of High Blink 4L bulb. After the shift conditions are met,
attempt a shift to 4H under conditions of below 87 rpm
in front and rear propeller shaft and "Neutral" position.
After successfully shifting into 4H, stop blinking 4L
bulb.
Zone 1 Same as above
Same as above
Neutral
Zone 2 Same as above
Low Blink 4L bulb. After the shift conditions are met,
attempt a shift to 4L. After successfully shifting into
4L, stop blinking 4L bulb.
Same as above
Right Stop
Left Stop Blink 4L bulb. After the shift conditions are met,
attempt a shift to 4L. After successfully shifting into
4L, stop blinking 4L bulb.
Left of High Same as above
High Same as above
Right of High Same as above
Zone 1 Same as above
Neutral Same as above
Zone 2 Same as above
Low No action required. 4L bulb on.
Right Stop No action required. 4L bulb on.
TRANSFER CASE - TOD 5D2-21
System Response (Action)