SSANGYONG Y200
INSPECTION PROCEDURE
YAD5C270
YAD5C280
YAD5C290
CLUTCH DISC
1. Clutch Cover
•
Check the diaphragm spring tip for wear and
height unevenness.
Unevenness Limit
•
Check the pressure plate surface for wear, crack
and discoloration.
•
Check the strap plate rivet for looseness and
replace the clutch cover if loosened.
2. Clutch Disc
•
Check the facing for rivet looseness, excessive
runout, sticks, oil and grease.
•
Measure the rivet head depth. If out limit,
replace the disc.
Wear Limit
3. Clutch Disc Plane Rate
•
Measure the clutch disc plane rate and replace
the disc as needed.
Limit Value
CLUTCH 5C-15
0.8 mm
0.3 mm
0.7 mm