General Description And Operation; General Description - SSANGYONG Y200 Manual

5C-2 CLUTCH

GENERAL DESCRIPTION AND OPERATION

GENERAL DESCRIPTION

Driving members
The driving members consist of two flat surfaces
machined to a smooth finish. One of these is the rear
face of the engine flywheel and the other is the pressure
plate. The pressure plate is fitted into a steel cover,
which is bolted to the flywheel.
Driven members
The driven member is the clutch disc with a splined
hub which is free to slide lengthwise along the splines
of the input shaft, but which drives the input shaft
through these same splines.
The driving and driven members are held in contact
by spring pressure. This pressure is exerted by a
diaphragm spring in the pressure plate assembly.
Operating members
The clutch release system consists of the clutch pedal,
the clutch release shaft, the clutch cable, the release
arm and the release bearing. When pressure is applied
to the clutch pedal, the clutch release shaft pushes
against the release bearing by rotating. The bearing
then pushes against the diaphragm spring in the
pressure plate assembly, thereby releasing the clutch.
YAD5C010
A. Clutch Release Cylinder Pipe (W/ transmission case)
B. Clutch Release Cylinder Pipe (W/ transmission case)
C. Concentric Slave Cylinder
SSANGYONG Y200