5C-10 CLUTCH
MAINTENANCE AND REPAIR
YAD5C070
YAD5C080
YAD5C090
ON-VEHICLE SERVICE
CLUTCH DISC
Removal & Installation Procedure
1. Remove the starter motor. Install the special tool
to the flywheel through the starter motor mounting
holes.
2. Unscrew the release cylinder mounting bolts and
remove the release cylinder.
Installation Notice
Tightening Torque
Notice: When the clutch housing and the
transmission is removed, it may be possible any
damage in the concentric slave cylinder.
3. Unscrew the clutch housing bolts and remove the
clutch housing, release fork and release bearing.
Insert the centering pin into the clutch spline.
Loosen the clutch cover bolts 1/2 turn in crisscross
sequence until the spring tension is released.
Notice: Do not remove the bolts at a time, or clutch
cover can be damaged or deformed.
30 - 40 N•m
(22 - 30 lb-ft)
SSANGYONG Y200