SSANGYONG Y200 Manual page 1747

9C-50 BODY EXTERIOR
3. Using special tool, remove sealant of door glass
of tail gate.
YAD9C2K0
4. Remove door glass of tail gate from the vehicle.
5. Using the knife, remove sealant around door glass
of tail gate and frame.
YAD9C2L0
Installation
1. Wash up outer panel of tail gate.
•
After using gauze 20 times, gauze is thrown
away.
•
Gauze is a solvent (isopropyl alcohol), gauze
keep wet completely.
•
Keep an eye on the washing section of glass
not to be touched by any thing polluted.
•
After washing glass, spread primer on the glass
section of wet state.
•
Wash up on the section of spreading primer
without being touched by any thing polluted.
YAD9C2M0
2. After washing up outer panel of tail gate, and then
spread primer.
•
Keep primer in the refrigerator.
•
Mix up primer.
•
Opening vessel, use them within 2 hours.
•
Opening vessel, immediately use them, if you
reopen them, use them within 24 hours, as soon
as possible.
•
Spread uniformly primer on the surface of
vehicle.
•
Available hour for spreading primer to the
vehicle : after 3 hour.
YAD9C2N0
SSANGYONG Y200