Table of Contents
Advertisement
5A-66 AUTOMATIC TRANSMISSION
DTC P0710 Transmission Fluid Temperature Sensor Circuit Malfunction (Cont'd)
Step
1. Turn the ignition OFF.
2. Disconnect the TCM connector B.
3. Turn the ignition ON.
11
4. Check the TFT sensor ground circuit for an open.
Is a problem found?
Repair the TFT ground circuit for an open.
12
Is a repair complete?
Repair an open or short to voltage in the TFT sensor
signal circuit as necessary.
13
Is the repair complete?
Check for a poor connection at the 10-way transmission
connector and TCM connector and repair the
14
malfunctioning terminals as necessary.
Is a repair necessary?
1. Turn the ignition OFF.
15
2. Replace the TCM.
Is the action complete?
1. Using the scan tool, clear the DTCs.
2. Road test the vehicle within the conditions for
setting this DTC as specified in the text.
16
Does the scan tool indicate that this diagnostic has
run and passed?
Check if any DTCs are set.
17
Are there any DTCs displayed or previously recorded
at Step 3 that have not been diagnosed?
Action
Value(s)
Yes
-
Go to Step 12
-
Go to Step 16
-
Go to Step 16
-
Go to Step 16
-
Go to Step 16
-
Go to Step 17
Go to
applicable
-
DTC table
No
Go to Step 14
-
-
Go to Step 15
-
Go to Step 2
System OK,
Check
Complete
SSANGYONG Y200
Advertisement
Chapters
Table of Contents
