SSANGYONG Y200 Manual page 1529

6A-18 POWER STEERING
4
3
YAD6A380
5
YAD6A390
6
YAD6A400
7
8
9
YAD6A410
6. Remove the pinion dust cover (lower) (3) and
remove the pinion lock nut (4).
Notice: When removing the steering pinion lock
nut, be sure to fix the pinion gear n order to protect
the damage of pinion gear.
7. Tapping the pinion lower part carefully using the
plane draft and hammer, remove the steering
pinion (5) from the pinion bearing.
Notice: Tap the draft using the hammer as lik the
picture.
8. Tapping the pinion bearing softly using the plane
and long draft and rubber hammer, remove the
bearing.
9. Remove the pinion shaft seal (7), needle bearing
(8), retainer ring (9).
Notice: Do not overhaul the power steering gear
housing and rack gear, if the damage happened,
replace them with assembly.
SSANGYONG Y200