3
4
1
1
SSANGYONG Y200
2
YAD6A420
2
1
YAD6A430
2
YAD6A440
a
YAD6A450
POWER STEERING 6A-19
Rack Gear Shaft Checks
1. Check the rack gear damage.
•
Set up the v-block (1) on the plane table.
•
Put the rack gear (2, 4) on the V-block.
•
Measure the straightness of rack gear using the
dial gauge (3).
•
Check the rack gear for the wear or damage.
2. Check the steering pinion gear for the damage.
•
Check the pinion gear (1) for the wear or damage.
•
Check the looseness and normal operating of
bearing (2).
3. Check the tie rod end, rack and pinion bellows for
the damage.
•
Check the tie rod end boot (1) for the crack or
wear.
•
Check the rack and pinion boot for the crack or
wear.
4. Check the steering gear housing for the crack,
deformation and wear.