DI01-42
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
B. Remove the oil filter assembly mounting bolts.
Notice
Be careful not to flow out the residual oil from the
engine. If flown out, immediately wipe it out.
Y220_01066
C. Remove the oil filter assembly from the cylinder block.
Installation Notice
- Replace the oil filter gasket with new one.
Tightening torque
Y220_01067
7. Remove the belt tensioning device.
A. Remove the shock absorber lower mounting bolt.
Installation Notice
Tightening torque
Y220_01068
B. Remove the shock absorber upper mounting bolt.
Installation Notice
Tightening torque
Y220_01069
25 ± 2.5 Nm
32 ± 3 Nm
82 ± 6 Nm
ENGINE ASSEMBLY
DI ENG SM - 2004.4