SSANGYONG Y200 Manual page 1957

D. Remove the snap ring piston pin from the piston.
E. Disassemble the piston and connecting rod.
F. Remove the piston rings from the piston.
Installation Notice
Replace the piston ring, bearing and snap ring with
new ones.
37. Lock the flywheel and remove the center bolt and
crankshaft pulley.
Installation Notice
Tightening torque
38. Remove the timing chain cover assembly.
A. Remove the cover bolts.
Installation Notice
Tightening torque
B. Hold the timing chain and remove the timing chain
cover by tapping it with a rubber hammer and a
screwdriver.
Installation Notice
Apply the sealant on the parting surface.
ENGINE ASSEMBLY
DI ENG SM - 2004.4
325 ± 33 Nm,
90° + 10°
10 ± 1.0 Nm
DI01-59
Y220_01132
Y220_01133
Y220_01134
Y220_01135
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN