9C-44 BODY EXTERIOR
4. Wash up flange of wind shield glass.
•
After using gauze 20 times, gauze is thrown
away
•
Gauze is a solvent (isopropyl alcohol), gauze
keep wet completely
•
Keep an eye on the washed section of glass
not to be touched by any thing polluted.
•
After washed body flange, spread primer on the
glass section of wet state.
•
If oil is stuck on the body flange, primer does
not spread on the body flange.
•
After spreading, is available time for use : from
YAD9C1T0
3 hours to 8 hours
•
As the body is polluted by primer, as soon as
possible mixing with ethil alcohol and ethil
asetate (as a volume 50 : 50) and with this wet
cloth is wiping solvent.
•
Term of validity of primer (90 days) which is
passed is thrown away.
•
As spreading primer, flowing into other sections,
pay attention not to pollute other sections.
5. Insert spacer of wind shield.
•
Insert spacer until kind of sound occur.
•
After spacer insert body, no clearance.
YAD9C1U0
6. After install glass of wind shield, check the
following description.
Notice: If the section (b) of glass corner happen
clearance between moulding and body, spacer
can adjust this clearance.
YAD9C1V0
SSANGYONG Y200