SSANGYONG Y200 Manual page 2010

10. Measure stretch shaft diameter of the connecting rod
bolts.
Limit "C"
11. Lubricate the new connecting rod bolts and tighten.
Tightening torque
• End play of connecting rod cap
Specified value
12. Position piston to TDC and measure the distance between
piston and parting surface of crankcase.
Permissible piston
protrusion
• Measure at both ends of axial direction.
ENGINE HOUSING
DI ENG SM - 2004.4
7.1 mm
40 ± 5.0 Nm,
90° + 10°
0.5 ~ 1.5 mm
0.765 ~ 1.055 mm
DI02-49
Y220_02126
Y220_02127
Y220_02128
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN