Table of Contents
Advertisement
DI01-58
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
35. Unscrew the bolts and remove the oil strainer assembly.
Installation Notice
Tightening torque
Y220_01128
36. Remove the piston assembly from the cylinder block.
A. Unscrew the bearing cap bolts.
Installation Notice
* Tighten the bolts from #1 cap.
Y220_01129
Installation Notice
* Align the oil grooves in bearing cap and connecting
rod.
B. Remove the bearing caps and lower bearing shells.
Y220_01130
C. Remove the piston assembly through the cylinder.
Notice
Do not mix up upper and lower crankshaft bearing
shells.
Y220_01131
25 ± 2.5 Nm
Step 1
55 ± 5.0 Nm
Step 2
90° + 10°
ENGINE ASSEMBLY
DI ENG SM - 2004.4
Advertisement
Chapters
Table of Contents
