SSANGYONG Y200 Manual page 1415

5D1-36 PART TIME - T/C
3. Slide the torsion spring and spacer to the left of
the shift shaft and position the end of the first
spring to fix on the drive tang.
YAD5D780
4. Push the end of the second spring to right and fix
it on the drive tang.
YAD5D790
5. Push the torsion spring and spacer together back
them completely.
6. Slide the electric shift cam onto the shift shaft.
7. Install the electric shift cam assembly into the
transfer case after installation of the shift fork.
YAD5D800
SSANGYONG Y200