SSANGYONG Y200 Manual page 1931

Inspection Before Disassembly and
Reassembly
Preparations and Preceding Works
1. Remove the cylinder block drain plug and seal and
completely drain the residual coolant from the cylinder
block.
Tightening torque
Notice
Replace the seal with new one once removed.
2. When the fan belt is installed, gently pump the belt shock
absorber mounting bolt (M19) 3 times.
3. Take off the fan belt while pushing the mounting bolt (M19).
4. Loosen the oil drain plug and completely drain the engine
oil.
Drain plug
ENGINE ASSEMBLY
DI ENG SM - 2004.4
30 Nm
25 ± 2.5 Nm
DI01-33
Y220_01045
Y220_01046
Y220_01047
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN