SSANGYONG Y200
5. Release fixing bolt (2 ea) of mud guard in the lower
vehicle. (the section of wheel rear)
6. After opening the door, release fixing bolt of fender.
(1ea)
YAD9C450
7. Release bolt (2ea) of the section of bumper facia.
YAD9C460
8. Separate fixing bolt (1ea) of rear section of hood
hinge and separate fixing bolt (3ea)of the upper
section of fender and then remove fender.
YAD9C470
9. Install reverse order of removal.
Notice:
1) Paint internal section of fender and installed
section of fender.
2) After installing fender, tighten temporarily bolt
(2 ea) the upper section of hood, in the back
and front, adjust the gap and clearance of door,
hood, and lamp.
YAD9C480
BODY EXTERIOR 9C-19