Repair Procedure; Hood Assembly - SSANGYONG Y200 Manual

SSANGYONG Y200

REPAIR PROCEDURE

HOOD ASSEMBLY

Removal and Installation
1. Release bolt of fixing bracket of shock absorber
in the hood.
Notice: While fixing bracket of shock absorber is
removed, back up hood, to prevent closing of hood
or use another supporting bar to prevent closing
of hood.
YAD9C070
2. Remove shock absorber. (Method to remove
shock absorber ; refer to replacement shock
absorber of hood)
YAD9C080
3. Remove hose of wiper washer.
4. After releasing fixing bolt of hood hinge, remove
hood assembly.
YAD9C090
5. After releasing fixing bolt of hood hinge, remove
hood hinge.
YAD9C100
BODY EXTERIOR 9C-9