19. Remove the supply inlet, supply outlet and return hose
from the fuel filter.
Notice
1. When separating the hoses from the fuel filter,
plug the openings with caps so that the
contaminants will not get into the fuel system.
2. Mark on all the hoses not to be mixed each other.
20. Remove the engine oil heater outlet hose.
21. Disconnect the cables from the cylinder block and other
components.
(e.g., coolant temperature sensor cable and oil
temperature switch)
22. Disconnect the engine ground cable and the alternator
"+" terminal cable.
Notice
Make sure to properly tighten the cable nuts when
installing. Otherwise, it may cause a poor ground or
electric charging problem.
23. Disconnect the "ST" terminal and "+" terminal cables from
the starter motor.
Notice
Make sure to properly tighten the cable nuts when
installing. Otherwise, it may cause an engine starting
problem.
ENGINE ASSEMBLY
DI ENG SM - 2004.4
DI01-27
Y220_01030
Y220_01031
Y220_01032
Y220_01033
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN