Qinq - HP ProCurve 5400zl Reference Manual

OVERVIEW
Category:
Primary context:
Related Commands
Usage: [no] qinq [ <mixedvlan|svlan> [tag-type<tpid>] ]
Description: Configure the device qinq mode. The command 'no qinq' disables
Parameters:
mixedvlan - This is a qinq mode with support for both CVLANs and SVLANs.
svlan
tag-type
COMMAND STRUCTURE

■ qinq

mixedvlan
tag-type
■
■ qinq svlan -- Configure as svlan mode
tag-type
■
EXAMPLES
Example: Enable QinQ
Enable QinQ:
Edge l(config)# qinq svlan tag-type 88a8
Edge 2(config)# qinq svlan tag-type 88a8
COMMAND DETAILS
mixedvlan (p. 409)
mixedvlan
■ qinq mixedvlan
Configure as mixedvlan mode. Mixed vlan mode configuration supports both C-VLAN
and S-VLAN operations on the same device. This allows the use of S-VLAN member
ports for QinQ tunneling.
The main advantage for mixed vlan mode is that users do not have to dedicate
the entire switch as a QinQ access switch.
Requires a reboot to take effect.
Next Available Option:
tag-type
■
© 2009 Hewlett-Packard Development Company, L.P.
config
svlan (page 661)
vlan (page 706)
show qinq (page 582)
qinq on the device (no tag-stacking). Changing qinq mode from
one to another requires reboot to take effect and the device
will boot up with a default configuration for the new qinq mode.
- This is a qinq mode with only SVLANs support.
- The tpid (ethertype) for provider tagged frames. The default
tpid value is 0x88a8.
-- Configure as mixedvlan mode
< 1536 to 65535 > -- Configure qinq tag-type (HEX NUMBER)
< 1536 to 65535 > -- Configure qinq tag-type (HEX NUMBER)
svlan (p. 410)
< 1536 to 65535 > -- Configure qinq tag-type (HEX NUMBER)
(p. 409)
(p. 410)
qinq
(p. 410)
(p. 410)
tag-type (p. 410)
(p. 410)
409