HP ProCurve 5400zl Reference Manual page 532

Command Line Interface Reference Guide
Usage: show ip ospf area [OSPF-AREA-ID]
Description: Show OSPF areas configured on the device. Invoked without
Next Available Option:
area-ip -- (OSPF-AREA-ID)
■
■ show ip ospf virtual-neighbor area OSPF-AREA-ID
Specify area of the virtual neighbors to show.
■ show ip ospf virtual-link area OSPF-AREA-ID
Specify area of the virtual links to show.
area-id
■ show ip ospf link-state OSPF-AREA-ID
Show LSAs for the specified area only.
area-ip
■ show ip ospf area OSPF-AREA-ID
arp
■ show arp
Usage: show arp [vlan VLAN-ID]
Description: Show the IP ARP translation table.
Next Available Option:
vlan -- Specify VLAN for which to show ARP entries. (VLAN-ID)
■
arp-protect
■ show arp-protect
Usage: show arp-protect [stats <VLAN-ID-RANGE>]
Description: Display Dynamic ARP Protection information.
Parameters:
Next Available Option:
statistics
■
© 2009 Hewlett-Packard Development Company, L.P.
parameters displays all OSPF areas configured. If the
'OSPF-AREA-ID' is specified detailed information for
the correspondent OSPF area is shown.
(p. 530)
If VLAN-ID is specified, the output is filtered on
the VLAN-ID.
o stats - Display ARP Protection VLAN counters.
-- (VLAN-ID-RANGE) (p. 594)
(p. 603)
show
530