HP ProCurve 5400zl Reference Manual page 226

Command Line Interface Reference Guide
OSPF authentication key (maximum 8 characters).
■ interface vlan VLAN-ID ip ospf all authentication-key
Set simple authentication method and key.
Next Available Option:
authentication-key
■
■ interface vlan VLAN-ID ip ospf all authentication-key OCTET-STR
OSPF authentication key (maximum 8 characters).
■ [no] interface vlan VLAN-ID ip rip authentication-key
Set RIP authentication key (maximum 16 characters).
Next Available Option:
auth-key-text
■
■ [no] interface vlan VLAN-ID ip rip IP-ADDR authentication-key
Set RIP authentication key (maximum 16 characters).
Next Available Option:
auth-key-text
■
■ [no] interface vlan VLAN-ID ip rip all authentication-key
Set RIP authentication key (maximum 16 characters).
Next Available Option:
auth-key-text
■
authentication-type
■ interface vlan VLAN-ID ip rip authentication-type < none | text >
Set authentication type used on this interface.
Supported Values:
■ none -- Do not use authentication.
■ text -- Use simple password.
■ interface vlan VLAN-ID ip rip IP-ADDR authentication-type < none | text >
Set authentication type used on this interface.
Supported Values:
■ none -- Do not use authentication.
■ text -- Use simple password.
■ interface vlan VLAN-ID ip rip all authentication-type < none | text >
Set authentication type used on this interface.
Supported Values:
© 2009 Hewlett-Packard Development Company, L.P.
-- OSPF authentication key (maximum 8 characters). (OCTET-STR)
-- Set RIP authentication key (maximum 16 characters). (OCTET-STR)
-- Set RIP authentication key (maximum 16 characters). (OCTET-STR)
-- Set RIP authentication key (maximum 16 characters). (OCTET-STR)
interface
(p. 223)
(p. 225)
(p. 225)
(p. 225)
224