HP ProCurve 5400zl Reference Manual page 270

Command Line Interface Reference Guide
proxy-arp
■ [no] interface vlan VLAN-ID ip proxy-arp
Usage: [no] ip proxy-arp
Description: Enable/disable proxy ARP. This is a VLAN context command.
qinq
■ interface [ETHERNET] PORT-LIST qinq
Usage: qinq port-type <cn-customer-network-port|pn-provider-network-port>
Description: Configure a port's type as customer-network or provider-network.
Next Available Option:
port-type
■
qos
■ [no] interface [ETHERNET] PORT-LIST qos
Usage: [no] qos [dscp <0..63|af11|af12|af13|af21|af22|af23|af31|af32|
Description: Set port-based priority. The 'dscp' or 'priority' must be
Next Available Options:
dscp -- Specify DSCP policy to use.
■
priority < 0 | 1 | 2 | ... > -- Specify priority to use.
■
■ [no] interface vlan VLAN-ID qos
Usage: [no] qos [dscp <0|1...63|af11|af12|af13|af21|af22|af23|af31|af32|
Description: Set VLAN-based priority. The 'dscp' or 'priority' must
© 2009 Hewlett-Packard Development Company, L.P.
It can be called directly from the VLAN context or may follow
the 'vlan VLAN-ID' command prefix. When proxy ARP is enabled on
a VLAN, the device responds to ARP requests received on the
VLAN ports when the device knows a route to the requested IP
addresses.
In svlan mode, the default port type is 'provider-network'. In
mixedvlan mode, default for SVLAN ports is 'provider-network'.
Configuring a port as either customer-network or provider-network
is applicable only if the device is configured in either svlan or
mixedvlan mode.
-- Configure qinq port-type(p. 263)
af33|af41|af42|af43|ef|cs0..cs7|000000|000001..111111> |
priority <0-7>]
specified if 'no' is not used. Using 'no' configures the device
not to apply a source-port priority to this port's packets.
This is an Interface context command. It can be called directly
from the interface context or follow the 'interface [ethernet]
PORT-LIST' command.
af33|af41|af42|af43|ef|cs0..cs7|000000|000001...111111> |
priority <0-7>]
be specified if 'no' is not used. Using 'no' configures
the switch not to apply a VLAN priority override to this
VLAN's packets.
(p. 231)
(p. 265)
interface
268