HP ProCurve 5400zl Reference Manual page 284

Command line interface, switch software
Hide thumbs Also See for ProCurve 5400zl:
Table of Contents

Advertisement

Command Line Interface Reference Guide
untagged
■ [no] interface vlan VLAN-ID untagged [ETHERNET] PORT-LIST
Usage: [no] untagged [ethernet] PORT-LIST
Description: Assign ports to current VLAN as untagged.
■ [no] interface svlan VLAN-ID untagged [ETHERNET] PORT-LIST
Usage: [no] untagged [ethernet] PORT-LIST
Description: Assign ports to current VLAN as untagged.
virtual-ip-address
■ [no] interface vlan VLAN-ID vrrp vrid < 1 to 255 > virtual-ip-address
Usage: [no] vrrp vrid <VRID> virtual-ip-address <IP-ADDR>
Description: Specify IP address to be supported by the virtual router instance.
Next Available Option:
ip-addr
-- Specify IP address/mask. (IP-ADDR/mask-LENGTH)
vlan
■ interface [ETHERNET] PORT-LIST link-keepalive vlan VLAN-ID
Set vlan-id for tagged UDLD control packets.
■ [no] interface vlan VLAN-ID
Usage: [no] vlan VLAN-ID [...]
Description: Add, delete, edit VLAN configuration or enter a VLAN context.
Next Available Options:
auto
-- Cause each port identified in the port list to learn its VLAN membership using the GARP
VLAN Registration Protocol (GVRP) ([ethernet] PORT-LIST)
dhcp-snooping
ip
-- Configure various IP parameters for the
igmp-proxy
© 2009 Hewlett-Packard Development Company, L.P.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
There is no default value.
If an existing VLAN-ID is specified you are put into the
context for that VLAN, and can then execute commands for that
VLAN. If a new VLAN-ID is specified, the new VLAN is added with
the VLAN-ID, and you are put into the context of the new VLAN.
If you follow the command with one of the VLAN Context commands
in the same command line, the context level is not changed, but
the commands are executed for the VLAN specified by the
VLAN-ID. The 'no' option of the VLAN command is used to delete
the VLAN specified by VLAN-ID.
--
(p. 230)
-- Associate an IGMP proxy domain with a
(p. 241)
(p. 225)
VLAN(p. 240)
VLAN(p. 238)
interface
282

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 3500ylProcurve 8200zl6200yl

Table of Contents