HP ProCurve 5400zl Reference Manual page 54

Command Line Interface Reference Guide
supplicant-timeout
■ aaa port-access authenticator [ETHERNET] PORT-LIST supplicant-timeout < 1 to 300 >
Set the supplicant response timeout on an EAP request
(default 30 sec.).
Range: < 1 to 300 >
suppress
■ [no] aaa accounting suppress
Do not generate accounting records for a specific type of user.
Next Available Option:
null-username
■
system
■ [no] aaa accounting system
Usage: [no] aaa accounting system
Description: Configure 'system' type of accounting.
Parameters:
Next Available Option:
mode < start-stop | stop-only > -- Specify how to initiate and terminate an accounting session.
■
(p. 40)
telnet
■ aaa authentication telnet
Usage: aaa authentication telnet <enable|login>
Description: Configure authentication mechanism used to control telnet
Parameters:
© 2009 Hewlett-Packard Development Company, L.P.
-- Do not generate accounting records for users with a null-username.
o start-stop - Send a start record accounting notice at the
beginning and a stop record notice at the end
of the accounting session. Do not wait for
acknowledgement.
o stop-only - Send a stop record accounting notice at the end
of the accounting session.Do not wait for
acknowledgement.
o radius - Use RADIUS as the accounting protocol
access to the switch.
o enable - Configure access to privileged mode.
o login - Configure login access.
o <primary-method> - Specifies the primary authentication
<start-stop|stop-only>
<radius>
<primary-method> [<backup-method>]
method for access control. Use <TAB>
or <?> after you specify enable or login
to get a list of all available
primary authentication methods.
aaa
(p. 41)
52