Page of 4
   
for the HP ProCurve 5400zl Switches
Software Version K.11.09 or greater
*Switches having any of the J9307A, J9308A, J9309A, or J9478A modules installed require a later minimum
software version. Refer to "Minimum Supported Software Version" on
Contents
About Your HP ProCurve Series 5400zl Switch Manual Set
View or Download the Software Manual Set
HP ProCurve Software Tools that Provide Network Management
Software Updates
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 2
Premium Software Features
Saving the Configuration After Installing or Exchanging a Module
Module Hot Swap Operation Notes
Minimum Supported Software Version
Mini-GBIC Operation Notes
About Your HP ProCurve Series 5400zl Switch Manual Set
The switch manual set includes the following:
Document
Read Me First (this document)
Installation and Getting Started Guide
Management and Configuration Guide
Advanced Traffic Management Guide
Multicast and Routing Guide
1
Access Security Guide
Command Line Interface Reference Guide
Event Log Message Reference Guide
PoE Planning and Implementation Guide
(for Power over Ethernet) Devices
Release Notes (for software updates)
1
The latest edition is always available in PDF format and downloadable as described in
2
For software release K.12.xx or greater.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 4
Available on the
ProCurve Web Site
1
1
1
1
1
1, 2
1, 2
1
1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 3
Shipped With
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
"View or Download the Software Manual Set" on page
the Switch
Yes
Yes
No
No
No
No
No
No
No
No
2.

Advertising

   Related Manuals for HP ProCurve 5400zl Series

   Summary of Contents for HP ProCurve 5400zl Series

  • Page 1: Read Me First

    *Switches having any of the J9307A, J9308A, J9309A, or J9478A modules installed require a later minimum software version. Refer to “Minimum Supported Software Version” on Contents About Your HP ProCurve Series 5400zl Switch Manual Set View or Download the Software Manual Set HP ProCurve Software Tools that Provide Network Management Software Updates .

  • Page 2

    View or Download the Software Manual Set For a complete set of manuals for your HP ProCurve product installation, software features, and configuration information, visit the HP ProCurve Web site, where you can freely view or download the latest manuals for your product. To do so: www.hp.com/go/procurve/manuals...

  • Page 3

    Switches having any of the J9307A, J9308A, J9309A, J9478A modules installed must run the K.14.xx software version that is available on the HP ProCurve website as of September 1, 2009. The J9447A and J9448A 5400zl switch bundles are shipped from the factory with the required minimum software version installed. To download...

  • Page 4

    HP ProCurve mini-GBICs, please contact a ProCurve sales representative or an authorized reseller. Hot Swapping mini-GBICs. The mini-GBICs that you can install in your HP ProCurve switch can be “hot swapped” — removed and installed after the switch is receiving power. You should disconnect the network cables from the mini-GBICs before hot swapping them.

Comments to this Manuals

Symbols: 0
Latest comments: