HP ProCurve 5400zl Reference Manual page 269

Command Line Interface Reference Guide
protocol-group
■
(ASCII-STR)
■ interface svlan VLAN-ID protocol
Set a predefined protocol for the current VLAN.
Next Available Options:
protocols
■
protocol-group
■
(ASCII-STR)
protocol-group
■ [no] interface vlan VLAN-ID protocol PROTOCOL-GROUP
Enter a list of protocols for the current VLAN delimited by commas.
■ [no] interface svlan VLAN-ID protocol PROTOCOL-GROUP
Enter a list of protocols for the current VLAN delimited by commas.
protocols
■ [no] interface vlan VLAN-ID protocol < IPX | IPv4 | IPv6 | ... >
Set a predefined protocol for the current VLAN.
Supported Values:
■ IPX -- IPX Protocol Group
■ IPv4 -- IP version 4 Protocol Group
■ IPv6 -- IP version 6 Protocol Group
■ ARP -- Address Resolution Protocol Group
■ Appletalk -- Appletalk Protocol Group
■ SNA -- System Network Architecture Protocol Group
■ NetBEUI -- Network BIOS Enhanced User Interface Protocol Group
■ [no] interface svlan VLAN-ID protocol < IPX | IPv4 | IPv6 | ... >
Set a predefined protocol for the current VLAN.
Supported Values:
■ IPX -- IPX Protocol Group
■ IPv4 -- IP version 4 Protocol Group
■ IPv6 -- IP version 6 Protocol Group
■ ARP -- Address Resolution Protocol Group
■ Appletalk -- Appletalk Protocol Group
■ SNA -- System Network Architecture Protocol Group
■ NetBEUI -- Network BIOS Enhanced User Interface Protocol Group
provider-network
■ interface [ETHERNET] PORT-LIST qinq port-type provider-network
Configure qinq port-type as provider-network
© 2009 Hewlett-Packard Development Company, L.P.
-- Enter a list of protocols for the current VLAN delimited by commas.
(p. 267)
< IPX | IPv4 | IPv6 | ... > -- Set a predefined protocol for the current VLAN.
-- Enter a list of protocols for the current VLAN delimited by commas.
(p. 267)
interface
(p. 267)
267