HP ProCurve 5400zl Reference Manual page 305

Command Line Interface Reference Guide
IP-PORT
■ ip ssh port TCP/UDP-PORT
Specify the TCP port number on which the daemon should listen.
IPV4-ADDR
■ ip authorized-managers IP-ADDR
Authorized manager IPv4 address.
Next Available Options:
IPV4-MASK
■
access < Manager | Operator > -- Define an access level
■
access-method
■
IPV4-MASK
■ ip authorized-managers IP-ADDR IP-ADDR
IP mask defining a group of adjacent manager IP addresses.
irdp
■ [no] ip irdp
Usage: [no] ip irdp
Description: Enable/disable ICMP Router Discovery Protocol (IRDP).
keystring
■ ip ssh public-key < manager | operator > KEYSTRING
ASCII formatted public-key.
load-sharing
■ [no] ip load-sharing
Usage: ip load-sharing <2-4>
no ip load-sharing
Description: Specify the maximum number of equal cost IP load sharing
Next Available Option:
load-sharing-value
■
paths(p. 303)
load-sharing-value
■ ip load-sharing < 2 to 4 >
© 2009 Hewlett-Packard Development Company, L.P.
-- IP mask defining a group of adjacent manager IP addresses. (IP-ADDR)
< all | ssh | telnet | ... > -- Define an access method
To configure IRDP, execute '[no] ip irdp [...]' from the
VLAN context for the VLAN on which you wish to configure IRDP.
paths. no ip load-sharing disables IP load sharing.
< 2 to 4 > -- Specify the maximum number of equal cost IP load sharing
desired.(p. 293)
desired.(p. 294)
ip
(p. 303)
303