HP ProCurve 5400zl Reference Manual page 258

Command Line Interface Reference Guide
Indicates that the router should never be used as a default by its neighbors.
no-tag-added
■ [no] interface [ETHERNET] PORT-LIST monitor all < In | Out | Both > mirror < 1 to 4 >
no-tag-added
Don't add VLAN tag for this untagged-port
ns-interval
■ [no] interface vlan VLAN-ID ipv6 nd ns-interval
Usage: [no] ipv6 nd ns-interval <milliseconds>
Description: Configures the neighbor discovery time between neighbor
Next Available Option:
number
■
solicitation requests sent for an unresolved destination, or between duplicate address detection
neighbor solicitation
number
■ interface vlan VLAN-ID ip irdp preference < -2147483647 to 2147483647 >
The router preferability number. Higher values are more preferable.
Range: < -2147483647 to 2147483647 >
■ interface vlan VLAN-ID ipv6 nd ns-interval < 1000 to 3600000 >
Usage: [no] ipv6 nd ns-interval <milliseconds>
Description: Configures the neighbor discovery time between neighbor
Range: < 1000 to 3600000 >
■ interface vlan VLAN-ID ipv6 nd reachable-time < 1000 to 3600000 >
Usage: [no] ipv6 nd ra-lifetime <seconds>
Description: Configures the router lifetime sent in router advertisements.
Range: < 1000 to 3600000 >
ospf
■ [no] interface loopback < 0 to 7 > ip ospf
© 2009 Hewlett-Packard Development Company, L.P.
solicitation requests sent for an unresolved destination,
or between duplicate address detection neighbor solicitation
requests. When set to a non-default value, this is included in
router advertisements as the ra-retranstime value.
< 1000 to 3600000 > -- Configures the neighbor discovery time between neighbor
requests(p. 256)
solicitation requests sent for an unresolved destination,
or between duplicate address detection neighbor solicitation
requests. When set to a non-default value, this is included in
router advertisements as the ra-retranstime value.
A value of 0 tells hosts on the interface to not use this
router as a default router.
interface
256