HP ProCurve 5400zl Reference Manual page 752

Command Line Interface Reference Guide
Next Available Options:
all -- Resets all previously blocked by the connection rate filter
■
host -- Match packets from the specified IP address. (IP-ADDR)
■
src-ip -- Match packets from the specified subnet. (IP-ADDR/mask-LENGTH)
■
untagged
■ [no] vlan VLAN-ID untagged [ETHERNET] PORT-LIST
Usage: [no] untagged [ethernet] PORT-LIST
Description: Assign ports to current VLAN as untagged.
virtual-ip-address
■ [no] vlan VLAN-ID vrrp vrid < 1 to 255 > virtual-ip-address
Usage: [no] vrrp vrid <VRID> virtual-ip-address <IP-ADDR>
Description: Specify IP address to be supported by the virtual router instance.
Next Available Option:
ip-addr -- Specify IP address/mask. (IP-ADDR/mask-LENGTH)
■
vlan
■ [no] vlan VLAN-ID ipv6 access-group ACCESS-GROUP vlan
VLAN acl.
■ [no] vlan VLAN-ID vrrp vrid < 1 to 255 > track vlan
Usage: [no] vrrp vrid <VRID> track vlan <VLAN-ID-RANGE>
Description: Enable/disable tracking of VLANs for VR.
Next Available Option:
vlan-id-range
■
vlan-id-range
■ [no] vlan VLAN-ID vrrp vrid < 1 to 255 > track vlan VLAN-ID-RANGE
Usage: [no] vrrp vrid <VRID> track vlan <VLAN-ID-RANGE>
Description: Enable/disable tracking of specified VLANs for VR.
voice
■ [no] vlan VLAN-ID voice
© 2009 Hewlett-Packard Development Company, L.P.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
There is no default value.
Multiple <VLAN-ID-RANGE> can be specified.
-- Enable/disable tracking of specified VLANs for VR (VLAN-ID-RANGE)
(p. 715)
(p. 727)
(p. 748)
(p. 729)
vlan
(p. 750)
750