HP ProCurve 5400zl Reference Manual page 134

Command Line Interface Reference Guide
Change CR/LF to unix style.
■ copy tftp config CONFIG IP-ADDR FILENAME unix
Change CR/LF to unix style.
■ copy tftp config CONFIG IPV6-ADDR FILENAME unix
Change CR/LF to unix style.
■ copy tftp show-tech IP-ADDR FILENAME unix
Change CR/LF to unix style.
■ copy tftp show-tech IPV6-ADDR FILENAME unix
Change CR/LF to unix style.
■ copy xmodem startup-config unix
Change CR/LF to unix style.
■ copy xmodem command-file unix
Change CR/LF to unix style.
■ copy xmodem config CONFIG unix
Change CR/LF to unix style.
■ copy usb command-file FILENAME unix
Change CR/LF to unix style.
■ copy command-output COMMAND-OUTPUT tftp IP-ADDR FILENAME unix
Change CR/LF to unix style.
■ copy command-output COMMAND-OUTPUT tftp IPV6-ADDR FILENAME unix
Change CR/LF to unix style.
■ copy command-output COMMAND-OUTPUT xmodem unix
Change CR/LF to unix style.
■ copy config < config1 | config2 | config3 > tftp IP-ADDR FILENAME unix
Change CR/LF to unix style.
■ copy config < config1 | config2 | config3 > tftp IPV6-ADDR FILENAME unix
Change CR/LF to unix style.
■ copy config < config1 | config2 | config3 > xmodem unix
Change CR/LF to unix style.
■ copy running-config tftp IP-ADDR FILENAME unix
Change CR/LF to unix style.
■ copy running-config tftp IPV6-ADDR FILENAME unix
© 2009 Hewlett-Packard Development Company, L.P.
copy
132