HP ProCurve 5400zl Reference Manual page 555

Command Line Interface Reference Guide
front-panel-security
■ show front-panel-security
Usage: show front-panel-security
Description: Show current security status of the front panel butons.
general
■ show ip ospf general
Usage: show ip ospf general
Description: Show OSPF basic configuration and operational information.
■ show ip rip general
Usage: show ip rip general
Description: Show RIP basic configuration and operational information.
global
■ show vrrp config global
Show global VRRP configuration information.
■ show vrrp statistics global
Show global VRRP configuration information.
group
■ show ip igmp group IP-ADDR
Show ports the specified multicast group address is registered on.
■ show ipv6 mld vlan VLAN-ID group
Show MLD VLAN group info.
Next Available Option:
ipv6-addr
■
■ show snmpv3 access-rights < ManagerPriv | ManagerAuth | OperatorAuth | ... >
Show SNMPv3 users.
© 2009 Hewlett-Packard Development Company, L.P.
'password-clear' is disabled, the password(s) cannot be reset using
the clear button on the front panel of the device.
reset' is disabled, the configuation/password(s) can not be reset
using the clear and reset button combination at boot time.
'password-recovery' enabled (and the front panel buttons disabled),
a lost password can be recovered by contacting HP customer support.
With 'password-recovery' disabled, there is no way to access a
device after losing a password with the front panel buttons
disabled.
-- Show MLD VLAN group address information. (IPV6-ADDR)
show
If
If 'factory-
With
(p. 563)
553