HP ProCurve 5400zl Reference Manual page 121

Command Line Interface Reference Guide
Next Available Option:
append
■
mm
■ copy crash-data mm
Copy from the management card.
Next Available Options:
tftp -- Copy data to a TFTP
■
xmodem
■
usb -- Copy data to a USB flash
■
■ copy crash-log mm
Copy from the management card.
Next Available Options:
tftp -- Copy data to a TFTP
■
xmodem
■
usb -- Copy data to a USB flash
■
operator
■ copy tftp pub-key-file IP-ADDR FILENAME operator
Replace the key(s) for operator access (default); follow with the 'append' option to
add the key(s).
Next Available Option:
append
■
■ copy tftp pub-key-file IPV6-ADDR FILENAME operator
Replace the key(s) for operator access (default); follow with the 'append' option to
add the key(s).
Next Available Option:
append
■
■ copy tftp autorun-cert-file IP-ADDR FILENAME operator
Replace the key(s) for operator access (default); follow with the 'append' option to
add the key(s).
Next Available Option:
append
■
■ copy tftp autorun-cert-file IPV6-ADDR FILENAME operator
© 2009 Hewlett-Packard Development Company, L.P.
-- Add the key(s) for access.(p. 102)
server.(p. 124)
-- Use xmodem on the terminal as the data
server.(p. 124)
-- Use xmodem on the terminal as the data
-- Add the key(s) for access.(p. 102)
-- Add the key(s) for access.(p. 102)
-- Add the key(s) for access.(p. 102)
destination.(p. 135)
drive.(p. 133)
destination.(p. 135)
drive.(p. 133)
copy
119