Wireless-Services - HP ProCurve 5400zl Reference Manual

OVERVIEW
Category:
Primary context:
Related Commands
Usage: wireless-services <SLOT-ID> [<reload|shutdown>]
Description: Configure parameters for the wireless-services module or
Parameters:
o <SLOT-ID> - Configure parameters for the wireless-services module.
o <SLOT-ID> reload - Reboot wireless-services module.
o <SLOT-ID> shutdown - Shutdown (halt) the wireless-services module.
NOTES
Multiple Contexts
This command also is available in the manager and operator contexts.
COMMAND STRUCTURE

■ wireless-services

change the module's state (reload or shutdown) (SLOT-ID)
config -- (ASCII-STR)
■
diagnostic-restart
■
reload -- Reboot wireless-services module.
■
shutdown
■
tech -- Enter the configuration context for the wireless-services module.
■
COMMAND DETAILS
config (p. 757)
diagnostic-restart (p. 757)
config
■ wireless-services SLOT-ID config CONFIG
diagnostic-restart
■ wireless-services SLOT-ID diagnostic-restart
Reboot wireless-services module into diagnostic partition.
reload
■ wireless-services SLOT-ID reload
© 2009 Hewlett-Packard Development Company, L.P.
config
change the module's state (reload or shutdown).
wireless-services
(p. 757)
-- Reboot wireless-services module into diagnostic partition.
-- Shutdown (halt) the wireless-services module.
reload (p. 757)
shutdown (p. 758)
wireless-services
-- Configure parameters for the wireless-services module or
(p. 757)
(p. 758)
(p. 758)
(p. 758)
tech (p. 758)
wireless-services (p. 758)
(p. 757)
757