HP ProCurve 5400zl Reference Manual page 423

Command Line Interface Reference Guide
Next Available Options:
integer-range
■
binary-range
■
well-defined
■
Codepoint) value and an
■ qos < udp-port | tcp-port > ip-all range TCP/UDP-PORT TCP/UDP-PORT dscp
Specify DSCP policy to use.
Supported Values:
Binary formatted value from 000000 to 111111
Next Available Options:
integer-range
■
binary-range
■
well-defined
■
Codepoint) value and an
■ qos type-of-service diff-services < 0 to 63 > dscp
Define Differentiated Services Codepoint to which to map IP ToS.
Next Available Options:
integer-range
■
binary-range
■
well-defined
■
map IP ToS.(p. 434)
■ qos type-of-service diff-services < 0 to 63 > dscp
Define Differentiated Services Codepoint to which to map IP ToS.
Next Available Options:
integer-range
■
binary-range
■
well-defined
■
map IP ToS.(p. 434)
■ qos type-of-service diff-services < af11 | af12 | af13 | ... > dscp
Define Differentiated Services Codepoint to which to map IP ToS.
Next Available Options:
integer-range
■
binary-range
■
well-defined
■
map IP ToS.(p. 434)
dscp-map
■ [no] qos dscp-map
Usage: [no] qos dscp-map <0|1...63|af11|af12|af13|af21|af22|af23|af31|af32|
Description: Define mapping between a DSCP (Differentiated-Services
© 2009 Hewlett-Packard Development Company, L.P.
< 0 to 63 > -- Specify the DSCP code-point in decimal.
< 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
< af11 | af12 | af13 | ... > -- Define mapping between a DSCP (Differentiated-Services
802(p. 434)
< 0 to 63 > -- Specify the DSCP code-point in decimal.
< 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
< af11 | af12 | af13 | ... > -- Define mapping between a DSCP (Differentiated-Services
802(p. 434)
< 0 to 63 > -- Specify the DSCP code-point in decimal.
< 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
< af11 | af12 | af13 | ... > -- Define Differentiated Services Codepoint to which to
< 0 to 63 > -- Specify the DSCP code-point in decimal.
< 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
< af11 | af12 | af13 | ... > -- Define Differentiated Services Codepoint to which to
< 0 to 63 > -- Specify the DSCP code-point in decimal.
< 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
< af11 | af12 | af13 | ... > -- Define Differentiated Services Codepoint to which to
af33|af41|af42|af43|ef|cs0..cs7|000000|000001...111111>|
[priority <<0-7>|no-override>]
[name <str>]
Codepoint) value and an 802.1p priority. The mapping is used
to assign priority for IPv4 packets if a QoS classifier uses
qos
(p. 423)
(p. 416)
(p. 423)
(p. 416)
(p. 423)
(p. 416)
(p. 423)
(p. 416)
(p. 423)
(p. 416)
421