HP ProCurve 5400zl Reference Manual page 726

Command Line Interface Reference Guide
Usage: [no] ipv6 mld fastleave < port-list >
Description: Enables MLD fast-leaves on the specified ports in the selected VLAN.
forbid
■ [no] vlan VLAN-ID forbid [ETHERNET] PORT-LIST
Usage: [no] forbid [ethernet] PORT-LIST
Description: Prevent ports from becoming a member of the current VLAN.
forcedfastleave
■ [no] vlan VLAN-ID ip igmp forcedfastleave [ETHERNET] PORT-LIST
Usage: [no] ip igmp forcedfastleave [ethernet] PORT-LIST
Description: When enabled, this feature forces IGMP Fast Leaves to occur
■ [no] vlan VLAN-ID ipv6 mld forcedfastleave [ETHERNET] PORT-LIST
Usage: [no] vlan < vid > ipv6 mld forcedfastleave <port-list>
Description: Enables MLD Forced Fast-Leave on the specified ports in the selected
VLAN,
command
forward
■ vlan VLAN-ID ip igmp forward [ETHERNET] PORT-LIST
Usage: ip igmp forward [ethernet] PORT-LIST
Description: Instruct the device to forward incoming multicast packets
■ vlan VLAN-ID ipv6 mld forward [ETHERNET] PORT-LIST
Usage: vlan < vid > ipv6 mld forward < port-list >
Description: Instruct the device to forward incoming multicast packets
forward-protocol
■ vlan VLAN-ID ip forward-protocol
© 2009 Hewlett-Packard Development Company, L.P.
The no form of the command disables MLD fast-leave on the specified
ports in the selected VLAN.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
even when the port is cascaded. See 'ip igmp fastleave' for
more information. The default behavior is for IGMP Forced
FastLeaves to be disabled.
This feature is configured for ports on a per-VLAN basis.
even if they are cascaded. (Default: Disabled.)
disables Forced Fast-Leave on the specified ports in the selected VLAN
received on the specified ports.
configured on a per-VLAN basis.
received on the specified ports.
configured on a per-VLAN basis.
The no form of the
This feature is
This feature is
vlan
724