HP ProCurve 5400zl Reference Manual page 314

Command line interface, switch software
Hide thumbs Also See for ProCurve 5400zl:
Table of Contents

Advertisement

Command Line Interface Reference Guide
Usage: [no] ip source-binding trap OutOfResources
Description: Set traps for dynamic ip lockdown.
Next Available Option:
OutOfResources
ttl
■ ip ttl < 2 to 255 >
Usage: ip ttl <2-255>
Description: Specify TTL for outgoing IP packets.
Range: < 2 to 255 >
udp-bcast-forward
■ [no] ip udp-bcast-forward
Usage: [no] ip udp-bcast-forward
Description: Enable/disable UDP broadcast forwarding.
unreachable
■ [no] ip icmp unreachable
Usage: [no] ip icmp unreachable
Description: Enable/disable destination unreachable error messages.
vlan
■ ip source-binding VLAN-ID
Next Available Option:
ip
-- (IP-ADDR)
■ [no] ip route IP-ADDR/MASK-LENGTH vlan VLAN-ID
Specify the destination VLAN.
Next Available Option:
distance
298)
zero-broadcast
■ [no] ip zero-broadcast
Usage: [no] ip zero-broadcast
Description: Enable/disable usage of zero broadcast IP Address.
© 2009 Hewlett-Packard Development Company, L.P.
-- Set out-of-resources trap.
(p. 302)
< 1 to 255 > -- Set the administrative distance to associate with this static
(p. 305)
ip
route.(p.
312

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 3500ylProcurve 8200zl6200yl

Table of Contents