HP ProCurve 5400zl Reference Manual page 575

Command Line Interface Reference Guide
■ show policy NAME
Enter policy name.
nd
■ show ipv6 nd
Usage: show ipv6 nd
Description: Show the IPv6 Neighbor Discovery settings.
neighbor
■ show ip ospf neighbor
Usage: show ip ospf neighbor [IP-ADDR]
Description: Show all OSPF neighbors in the locality of of the
Next Available Option:
neighbor-ip
■
■ show ip pim neighbor
Usage: show ip pim neighbor [IP-ADDR]
Description: Show PIM neighbor information. Invoked without parameters
Next Available Option:
IP-ADDR
■
neighbor-ip
■ show ip ospf neighbor IP-ADDR
neighbors
■ show cdp neighbors
Show CDP neighbors. See 'show cdp help' for details.
Next Available Options:
neighbors-port
■
detail -- Show neighbor information field-per-line instead of shortened table
■
■ show ipv6 neighbors
Displays information on the IPv6 neighbor discovery cache
© 2009 Hewlett-Packard Development Company, L.P.
device. The 'IP-ADDR' can be specified to retrieve
detailed information for the specific neighbor only.
-- (IP-ADDR) (p. 573)
shows all PIM neighbors of this device. If the IP-ADDR is
specified then detailed information for the specified neighbor
is shown.
-- Specify the IP address of the PIM neighbor to show. (IP-ADDR)
-- Show CDP neighbors on specified port only. ([ethernet] PORT-NUM)
show
(p. 562)
(p. 574)
format.(p. 546)
573