HP ProCurve 5400zl Reference Manual page 33

Command Line Interface Reference Guide
Next Available Option:
VLAN-ID
■
by default). (VLAN-ID)
■ [no] aaa port-access web-based [ETHERNET] PORT-LIST auth-vid
Configures VLAN where to move port after successful authentication (not configured
by default).
Next Available Option:
web-authvid
■
configured by default). (VLAN-ID)
clear-statistics
■ aaa port-access authenticator [ETHERNET] PORT-LIST clear-statistics
Clear the authenticator statistics.
■ aaa port-access supplicant [ETHERNET] PORT-LIST clear-statistics
Clear the supplicant statistics.
client-limit
■ [no] aaa port-access authenticator [ETHERNET] PORT-LIST client-limit
Set the maximum number of clients to allow on the port.
Next Available Option:
NUMBER-OF-CLIENTS
■
(NUMBER)
■ aaa port-access web-based [ETHERNET] PORT-LIST client-limit < 1 to 32 >
Set the port's maximum number of authenticated clients (default 1).
Range: < 1 to 32 >
client-moves
■ [no] aaa port-access web-based [ETHERNET] PORT-LIST client-moves
Set whether the client can move between ports (default disabled - no moves).
commands
■ [no] aaa accounting commands
Usage: [no] aaa accounting commands <stop-only> <radius>
Description: Configure 'commands' type of accounting.
Parameters:
© 2009 Hewlett-Packard Development Company, L.P.
-- Configures VLAN where to move port after successful authentication (not configured
(p. 54)
-- Configures VLAN where to move port after successful authentication (not
< 1 to 32 > -- Set the maximum number of clients to allow on the port.
(p. 42)
o stop-only - Send a record accounting notice after the execution
of command.
o radius - Use RADIUS as the accounting protocol.
(p. 55)
aaa
31