HP ProCurve 5400zl Reference Manual page 138

Command Line Interface Reference Guide
■ copy crash-log SLOT-ID-RANGE xmodem
Use xmodem on the terminal as the data destination.
■ copy crash-log mm xmodem
Use xmodem on the terminal as the data destination.
■ copy crash-log xmodem
Use xmodem on the terminal as the data destination.
■ copy flash xmodem
Use xmodem on the terminal as the data destination.
Next Available Option:
cv_out_flash
■
■ copy running-config xmodem
Use xmodem on the terminal as the data destination.
Next Available Options:
unix -- Change CR/LF to unix
■
pc -- Change CR/LF to PC
■
■ copy startup-config xmodem
Use xmodem on the terminal as the data destination.
Next Available Options:
unix -- Change CR/LF to unix
■
pc -- Change CR/LF to PC
■
■ copy event-log xmodem
Use xmodem on the terminal as the data destination.
Next Available Options:
unix -- Change CR/LF to unix
■
pc -- Change CR/LF to PC
■
© 2009 Hewlett-Packard Development Company, L.P.
< primary | secondary > -- Copy from primary/secondary
style.(p. 131)
style.(p. 120)
style.(p. 131)
style.(p. 120)
style.(p. 131)
style.(p. 120)
copy
flash.(p. 108)
136