HP ProCurve 5400zl Reference Manual page 602

Command Line Interface Reference Guide
■ show spanning-tree traps
Show spanning tree trap information.
trunks
■ show trunks
Usage: show trunks [[ethernet] PORT-LIST]
Description: Show a list of ports and the trunks to which they belong.
Next Available Option:
port-list
■
578)
type
■ show ip ospf link-state type < router | network | summary | ... >
Show LSAs of the specified type only.
Supported Values:
■ router -- Show router links only.
■ network -- Show network links only.
■ summary -- Show summary links only.
■ as-summary -- Show Autonomous System summary links only.
■ external -- Show Autonomous System external links only.
■ multicast -- Show multicast links only.
■ nssa -- Show NSSA external links only.
■ show ip route < static | connected | rip | ... >
Specify type of routes to display.
Supported Values:
■ static -- Show static routes only.
■ connected -- Show the switch's interface routes only.
■ rip -- Show RIP routes only.
■ ospf -- Show OSPF routes only.
■ show ipv6 route < connected >
Specify type of routes to display.
Supported Values:
■ connected -- Show the switch's interface routes only.
■ show statistics < aclv4 >
Supported Values:
■ aclv4 -- Ipv4 acl.
Next Available Option:
acl-name
■
© 2009 Hewlett-Packard Development Company, L.P.
If a PORT-LIST is supplied the command shows only the ports
specified.
-- Show the trunk information only for the ports specified. ([ethernet] PORT-LIST)
-- Enter the name of acl/policy. (ASCII-STR) (p. 528)
show
(p.
600